What to Do if You Have a Rusty Lawn Mower in Ogden, UT

May 20, 2019

Lawn mowers get pretty beat up over the course of their lives. They not only chew up a lot of grass, but they also get exposed to a significant amount of dirt and moisture, which means if you have metal parts on your lawn mower, there’s a chance they’ll get rusty over time.

Of course, rusty machines are a problem. The longer you let rust sit, the more it will eat away at the metal and potentially render certain components useless. For this reason, it’s important to engage in lawn mower repair if you have a rusty lawn mower in Ogden, UT on your hands. Here’s an overview of the steps you should take to resolve the problem:

  • Pull the spark plug boot and blades: Remove the spark plug boot before you begin tinkering with the lawn mower—this will prevent the machine from accidentally starting up. If you have a riding lawn mower, you can remove the deck from the rest of the machine, otherwise you can just maneuver your push mower around in the way that makes the most sense for you to work on it. Once you’ve got the spark plug boot off, you should also remove the blades for easier access.
  • Get off loose particles: Using a wire brush, scrub the top and bottom of the deck to get rid of any loose rust particles that are present. You might need a little bit of assistance holding up a push mower while scrubbing the underside—a brick or other heavy item on the handle can do the trick.
  • Clean: Put some paint thinner on a rag and wipe off the top and bottom of the deck as thoroughly as you can to get rid of grease and oil, and allow the paint thinner to fully dry before you proceed to the next step.
  • Rust converter: Use a paintbrush to apply a rust converter product to all surfaces of the deck. Let it sit for about an hour, then apply a second coat. You should then wait two full days before you proceed to the next step.
  • Paint: Before you begin painting, cover the engine and all of the parts of the mower aside from the deck with paper bags, which you can secure with masking tape. Then use an exterior enamel spray paint to paint the entire deck. Sweep the paint from side to side while holding the can about six to eight inches away from the surface, and overlap your paths to get the smoothest surface possible. You should paint the top and let it dry before you paint the bottom. Make sure you’re working in a well-ventilated area for this process.

This is a simple process that should resolve your rust problems, assuming you haven’t let them get to the point where the deck is actually starting to crumble away. For more information about how to deal with a rusty lawn mower in Ogden, UT, contact the team at Ogden Lawn & Garden today.

Categorised in:

Ogden Lawn & Garden